Maxseal Flex – Flexible Waterproofing
Drizoro Maxseal Flex – Flexible Waterproofing For Concrete, Masonry, Blocks, Pre-Fabricated Panels & Brick Against Water Pressure. A Flexible Waterproof Coating Against Positive And Negative Pressure For Concrete, Masonry, Blocks, Pre-Fabricated Panels And Brick. MAXSEAL FLEX is a two-component product. Component “A” is a water-based special acrylic resin and component “B”, is a mortar based mixture of special cements, additives and well-graded aggregates. Once applied and cured, MAXSEAL FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction- concrete, natural and artificial stone, traditional mortar plasters, bricks, concrete blocks, Hebel etc.
Maxseal Foundation Cement Base Coating
Waterproof, Cement-Base Coating For Exterior Underground Concrete And Masonry MAXSEAL FOUNDATION is a construction grade cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives high protection to foundation concrete due to its high resistance to aggressive waters USES: Waterproofing of retaining walls, car parks, basements, elevator pits, below grade ingress of water in foundations. It can also be used as waterproofing layer or barrier against humidity by capillarity on a variety of mortar substrates. Advantages: • Good adhesion, it becomes part of the substrate , fills and seals all pores, missing mortar lines etc. • Must be applied to wet surfaces • Can be sprayed by airless sprayer (3 to 5mm tip) • Can be rendered or painted over. • NOT affected by salts and acids in soil. • Easy to apply with Drizoro brush. Will seal against positive and negative water pressure. Maxseal Foundation Cement Base Coating
Drizoro Maxseal Cementitous Coating
Single Component, Cement Base Waterproofing Decorative Coating For Application In A Single Layer
DESCRIPTION MAXQUICK ROLL is a polymer modified mortar, supplied in powder form. Once mixed with water, produces a decorative coating that is easily placed in a single layer with good waterproofing performance. USES – Protection against weathering and for waterproofing of concrete, cementitious renders, concrete blocks, natural stone and brick. – Decorative protection of walls, partition walls and other vertical elements. – Appropriate for interior and exterior applications. – To provide a waterproof seal under decorative renders. – To provide a seal against rising damp, especially in brick/block fencing. Maxquick Roll Waterproofing Coating