Maxplug Quick-Set Hydraulic Mortar

Hydraulic Mortar

QUICK-SET HYDRAULIC MORTAR STOPS LEAKS UNDER PRESSURE

maxplug

Description

View Maxplug Video | Technical Brochure | MSDS | Specifications

Uses

i MAXPLUG is a quick-setting hydraulic cement that instantly stops running water from cracks, holes or other openings in concrete and masonry, once it sets. It does not contract and sets within three to five minutes depending on the temperature. It only requires water for mixing.

  • To seal leaks instantly in concrete surfaces and solid masonry.
  • For emergency repairs on water pipes. For broken pipes, sometimes MAXPLUG will even work when the pipes are under pressure.
  • Emergency plugging of gas leaks.
  • To anchor bolts and other accessories that require immediate use.
  • In basements, tunnels and sewers, to stop water under pressure.

Advantages

  • The coating allows the base to transpire and thereby eliminates water vapour.
  • Stops leaks and waterproofs the surface to which it is applied.
  • Does not contract, or become weak due to its exothermic reactions.
  • It increases in volume. Its rapid set, three to five minutes, may be controlled (either speed up or slowed down) by adding warm or cold water. The setting may even be instantaneous.
  • It is the proper maintenance material for homes and industry.
  • It is not toxic when it comes into contact with drinking water.
  • Its mechanical properties are comparable to those of concrete, and in some cases even superior.
  • It sets under water.

Applications

  • To seal leaks instantly in concrete surfaces and solid masonry.
  • For emergency repairs on water pipes. For broken pipes, MAXPLUG will even work when the pipes are under pressure.
  • Emergency plugging of gas leaks
  • To anchor bolts and other accessories that require immediate use.
  • In basements, tunnels and sewers, to stop water under pressure.

Tools

MAXPLUG can be applied with a trowel, a spatula or even by hand. As any abrasive material, make sure to use protective rubber gloves when applying by hand.

How to mix

Mix only the amounts of MAXPLUG that can be applied in three minutes; if it is a water leak, mix only the amount of material that can be used with your hand. Use a plastic or rubber container, fill with MAXPLUG as needed, and add water slowly until it has the consistency of cement mortar.

One kilogram of MAXPLUG requires 280 cc of water.

How to Use

Normal weather, MAXPLUG takes between three to five minutes to set, depending on the temperature of the product, the water and atmospheric condition. Three to five minutes setting time is for temperatures in the 18º to 20º C range.

Warm weather, when temperatures are high and MAXPLUG sets very quickly, cold water must be used to delay the setting time, allowing you time to apply the material.

In extreme cases, keep the product in the shade and add ice to the mixing water.

Cold Weather, at a low temperatures, use warm or hot water to prepare maxplug mixes. At extremely low temperatures, i.e., below 0º C, heat the material and use hot water.

Surface Preparation. All cracks should have a minimum depth of 2 centimMaxplug Correct Wayetres and an opening of 1.5 to 2 centimetres. Make a square-shaped cut, preferably dovetail to the surface to which the material is to be applied; avoid the “V” shape. See drawing above. Clean the surface until it is free of all loose materials; wet the surface if water is not present at the time of application. Use MAXPLUG without force.

Sealing Concrete Walls and Slabs

Once the surface has been prepared by removing the loose concrete from the crack and cutting to a depth of 5 cms., apply maxplug in small amounts. Mix only the amount of material that can be applied by hand; do not pour the material in place; always use your hands. Wait until it becomes warm before applying, immediately remove the excess material and continue until the crack is finished. Under great pressure, in tunnels and basements do not try to plug up the crack at once.

Maxplug is ideal to anchor bolts and metal fixtures to concrete.

Sealing concrete slabs and walls

This is very common in basements, elevator shafts, swimming pools and water towers. Make sure there is an opening of at least 2 x 3 cm., and seal it with MAXPLUG making a waterproof cove at the joint of floor and wall.

Sealing Process iView Maxplug Video

drizoro maxplug- stop leaks in minutes

Leaks in cracks or joints

Once the surface has been prepared by removing the loose concrete from the crack and cutting to a depth of 5 cms., apply MAXPLUG is small amounts. Mix only the amount of material that can be applied by hand; do not pour the material in place; always use your hands. Wait until it becomes warm before applying, immediately remove the excess material and continue until the crack is finished. Under great pressure, in tunnels and basements do not try to plug up the crack at once.

Expansion joints.

MAXPLUG, a rigid product once it has set is not the ideal material for this type of work since expansion joints are subject to constant movement. Nevertheless, it is used to stop the water in expansion joints; later, when it is dry, the expansion joint is made with a flexible material.

MAXPLUG is ideal to anchor bolts and metal fixtures to concrete.

i

Technical data – Mechanical resistance

AGE

FLEXURAL STRENGTH(Kp / cm2)

COMPRESSION STRENGTH(Kp / cm2)

30 minutes
12
38
3 days
37
225
7 days
57
362
28 days
52
407

i

Test No 14-1/83-M INCE, Madrid.

Product requirements.

One kilogram of MAXPLUG fills approximately 0.6 cubic decimeters.

Packagingi

25 kilogram drums and 5 kilogram cans, and 1kg handy pack.

Caution

As all cement products, MAXPLUG is abrasive a protective rubber gloves must be used to prepare the mixture and apply it. If any of the mixture gets into the eyes, rinse thoroughly with clean water, but do not rub. If irritation continues, consult a doctor.

Expansion Joints

i

Maxplug, a rigid product once it has set is not the ideal material for this type of work since expansion joints are subject to constant movement. Nevertheless, it is used to stop the water in expansion joints; later, when it is dry, the expansion joint is made with a flexible material. Use in conjunction with Drizoro Maxjoint Elastic and Drizoro Maxseal Flex

i

Maxplug is ideal to anchor bolts and metal fixtures to concrete.

GuaranteeThe information contained in this leaflet is based on our experience and technical knowledge, obtained through laboratory testing and from bibliographic material. DRIZORO reserves the right to introduce changes without prior price. Any use of this data beyond the purposes expressly specified in the leaflet will not be the Company´s responsibility unless authorised by us. The data shown on consumptions, measurement and yields are for guidance only and based on our experience. These data are subject to variation due to the specific atmospheric and jobsite conditions so reasonable variations from the data may be experienced. In order to know the real data, a test on the jobsite must be done, and it will be carried out under the client responsibility. We shall not accept responsibility exceeding the value of the purchased product. For any other doubt, consult our Technical Department. This version of bulletin replaces the previous one.

Hydraulically Expanding Mortars